Products
·eps concrete sandwich panel production line
·hollow core wall panel machine
·ICF block/ICF block machine
·EPS machine
·Ceramsite block machine
·prefab house
·concrete fence machine
·wire mesh machine
Contact US
Add: No. 699 Yucai Street Hengshui City, Hebei Province, China
Moblie:+86-135 735 60091
Contact person: Ms. Wendy Shi
E-mail:swjallen@163.com
Hot Links
present location: Home >> Products >> EPS machine-EPS block moulding machine

EPS machine-EPS block moulding machine

EPS machines include the following equipments:

1. pre-expander

2. EPS block moulding machine

3. EPS cutting machine

4. EPS recycling machine

If you want to make different kinds of eps products, you can use eps shape moulding machine.

Introduction to EPS block moulding machine:

The machine is welded by high-quality profile steel with age heating treatment which can bring a high strength, non-deformation and high resistance to the expansive force from high-density products.

  The machine is controlled by LC full computer touch screen displayer which can realize a full automatic cycle operation of mould opening, mould closing, material feeding, heating, heat preserving, vacuum cooling, de-molding and extruding-out of finished products.


  The surface of the mould is made of special aluminum alloy panel which can realize a high efficiency of heat conduction, favorable tensile strength and long service life.


  The machine is integrated with overseas advanced and special penetrating and heating techniques for shaping, and a high pressure suction fan for material feeding, cooling with a strong penetrability, low consumption of steam, high speed of shaping and low water content so as to ensure the uniformity of inside and outside of the product.

 There are two kinds of block moulding machine:air-cooling block moulding machine and block moulding machine with vacuum.

  Specs of air-cooking block moulding machine:

 Mould Size  5080x1240x1030mm
 Block size  2000-8000mmx1200mmx1000mm(LengthxWidthxHeight)
 Density range  4.5-30kg/m3
 Capacity

 10kg/m3: about 9 blocks/hour

 15kg/m3: about 9 blocks/hour

 20kg/m3: about 5 blocks/hour

 steam pressure  0.6-0.8mpa
 steam consumption  10-15kg/m3
 steam inlet DN  100mm
 compressed air inlet DN  40mm
 compressed air consumption  1.8-2.2m3/cycle
 Electricity  380V
 Frenquency  50HZ
 power consumption  25KW
 Weight  12000KG
 Size  66000x2150x2950mm


Photos of EPS block moulding machine with vacuum:

 

swjallen@hotmail.com

Runjie Wall Panel Machinery CO.,Ltd    Add: No. 699 Yucai Street Hengshui City, Hebei Province, China    Mobile: +86-135 735 60091